How to Manage a Work Order

A work order is one job your team does for a customer — a repair, an install, a service call. It belongs to one of your Service markets, and it can be filed under a customer account or, for a job at a site with no account, left without one.

Before you start

You need a market whose line of business is Service (see How to Create a Market), and the Manage Service Work right to create and change work orders, create their invoices and record payments.

Raise a work order

  1. Open Markets, pick your Service market's tab, and open Work Orders.
  2. Click New Work Order. The market is already chosen for you.
  3. Give the job a short Summary (this is what the list shows), and add a description, trade, priority, the customer account if there is one, and the service address.
  4. Click Create. The work order gets its own number, such as WO-00012, and starts as New.

You can also start a work order from a customer's account page: open the account, go to Orders, and choose New for your Service market. The account is filled in for you.

Dispatch a technician

A visit is one trip to the site. Every work order starts with one visit.

  1. Open the work order and click Dispatch Technician (or open the Visits & Time tab and click the calendar mark on a visit).
  2. Click Choose Technician and pick the team member who will go.
  3. Set when they Arrive and Finish, and add any Visit Notes — gate codes, parking, what to bring.
  4. Click Save Visit. Assigning a technician to a new work order marks it Assigned.

Need a return trip? Click Add Visit on the Visits & Time tab. A visit can also be marked En Route, No Access or Cancelled from the same window.

Do the work

  • Start Work moves the job to In Progress. Put On Hold pauses it (waiting on a part, say) and Resume Work picks it up again.
  • On the Visits & Time tab the technician clicks Clock In on arrival and Clock Out on leaving. The time between adds up as Time Attended.
  • Record what was done on the Labor tab and what was fitted on the Parts tab. The totals are worked out for you from those lines.
  • Bring in a subcontractor or supplier on the Vendors tab, and keep a running log on the Notes tab. Each note shows who wrote it.

Finish the work

  1. On the Sign-Off tab, write up what was done and tick Completed satisfactorily when the customer has accepted the work, then save.
  2. Click Mark Complete. The work order is now Completed and ready to invoice.

Cancel Work Order is available until the job is complete.

Create the invoice

  1. Open the completed work order and click Create Invoice.
  2. Check what will be billed: the customer, how many labor lines and parts, and the total. Click Create Invoice again to confirm.
  3. The invoice is created from the labor and parts on the work order and gets its own number, such as INV-2026-0007. The work order moves to Invoiced, and the invoice appears on the Invoice tab and beside Invoice in the summary at the top.

Good to know:

  • Nothing is sent to the customer until you choose to. Use Email Invoice (below), or click View PDF on the Invoice tab to print it, download it or send it yourself.
  • A work order with no labor or parts can't be invoiced. Add what you are charging for on the Labor and Parts tabs first.
  • Tax is not added. Work orders don't record tax, so the invoice shows the labor and parts exactly as entered.
  • Pressing Create Invoice twice never makes two invoices. The second press shows the one already made.
  • Invoices are made one work order at a time, so Invoiced is not offered when you change several work orders at once from the list.
  • Made a mistake? Void Invoice (below) cancels the invoice and moves the work order back to Completed, so you can fix the labor or parts and create a corrected invoice.

Record a payment

  1. On the Invoice tab, click Record Payment.
  2. Enter the Amount Received (it starts at the balance due), the Date Received, how it was paid (Check, Bank Transfer (ACH), Wire Transfer, Card, Cash or Other) and, if there is one, a Reference such as the check number.
  3. Click Record Payment.

A part payment shows the invoice as Partly Paid with the balance still due. When nothing is left to pay, the invoice shows Paid. Every payment is listed under Payments with who recorded it. You can't record more than the balance due.

Void an invoice

Use this when an invoice was a mistake — the wrong amount, the wrong customer, or work that will be billed another way.

  1. On the Invoice tab, click Void Invoice.
  2. Type why it is being voided. The reason is required and stays with the invoice.
  3. Click Void Invoice to confirm.

What happens:

  • The invoice is marked Void and nothing is owed on it. It keeps its number, which is never used again, and it stays listed under Voided Invoices on the Invoice tab with the reason, who voided it and when. You can still open its PDF.
  • The customer's link stops working, including the one in any email already sent.
  • The work order moves back to Completed, so you can change the labor or parts and click Create Invoice again. The new invoice gets the next number.

Good to know:

  • An invoice with a payment or a credit note on it can't be voided, because that would erase money you received. Keep it as the record of what was paid, and correct it with a credit note (below) instead.
  • A voided invoice can't be brought back. Create a new one instead.

Issue a credit note

A credit note corrects an invoice your customer already has, without changing the invoice. Use it when a price was wrong, part of the work is being taken off, or you are giving a goodwill discount.

Void or credit note?

  • Void is for an invoice that should never have been sent and that nothing has been paid on. It cancels the whole invoice.
  • A credit note keeps the invoice and takes off part or all of what it charges. It is the right choice once the customer has paid anything, or when only part of the invoice was wrong.
  1. On the Invoice tab, under Credit Notes, click Issue Credit Note.
  2. Choose what to credit:
    • Pick Lines — tick the labor or parts lines to credit and how many of each. A line is credited at what it charged, after any discount on it, with its share of tax.
    • Whole Invoice — credits everything still standing on the invoice.
    • Custom Amount — type a description (for example, Goodwill discount) and an amount.
  3. Type Why Is It Being Credited? The reason is required. It is printed on the credit note and kept with it.
  4. If the customer already paid for some of what you are crediting, choose what happens to that money:
    • Keep It as Account Credit — the invoice shows it as credit the customer holds. Nothing is refunded.
    • Record It as Refunded — records that you are paying it back, with the date, how, and a reference. Kamo does not move the money: refund the customer the way you normally do.
  5. Click Issue Credit Note.

What happens:

  • The credit note gets its own number, such as CN-2026-0003, and its own PDF (View PDF). The invoice keeps its number and its lines.
  • What the customer owes comes down by the credit note's total. The invoice shows Partly Credited, or Credited when nothing is left to pay.
  • The customer's invoice page lists the credit note and takes it off the total.
  • Nothing is sent to the customer. Click Email beside the credit note to send it: the customer gets an email saying what was credited and why, with the credit note attached.

Good to know:

  • You can't credit more than is still standing on the invoice. Each line shows how many are left to credit.
  • A credit note can't be taken back. If you credited too much, create a new invoice for the difference.

Record a refund

Use Record Refund to note money you gave back to the customer on this invoice — for work they were unhappy with, say, or to pay back credit they held.

Recording a refund does not move any money. Give the money back the way you normally do (cash, check, a refund from your card terminal or your Stripe dashboard), then record it here so the invoice tells the truth.

  1. On the Invoice tab, click Record Refund (next to Issue Credit Note). It shows once something has been paid.
  2. Enter the Amount Refunded. If the customer holds credit on the invoice, it starts at that amount.
  3. Enter the Date Refunded, How It Was Refunded, and a Reference if there is one, such as the check number. Add notes if you like.
  4. Click Record Refund.

What happens:

  • Credit the customer holds is paid back first. Anything more takes that much off the sale, so the invoice never asks for it again.
  • The refund is listed under Payments as a refund, with who recorded it. The invoice shows Partly Refunded, or Refunded when everything paid has gone back.
  • You can't refund more than was paid.

Send the invoice to the customer

Nothing goes to the customer on its own. When you are ready, open the Invoice tab and use the Send to Customer card.

  1. Click Email Invoice.
  2. Check Send To. It starts with the email address on the customer's account; you can change it (for example, to their accounts payable inbox) without changing the account.
  3. Add a Personal Message if you like.
  4. Read What the Customer Will Get — the subject line, the amount due, the due date and the attached PDF — then click Send.

The customer gets an email from your organization with the invoice attached as a PDF and a View invoice button. The button opens the invoice on your organization's own invoice page, with your logo and colors. They don't need an account or a password: the page shows the lines, the totals, what has been paid and the balance due, and they can download the PDF or print it from there. It works on a phone too.

Every send is listed under Sent and Shared: who sent it, when, the address it went to, and how many times the customer has opened it. If an email could not be handed over for delivery, it is marked Not Delivered — just send it again.

Good to know:

  • Copy New Link gives you a link to send another way, such as a text message. Earlier links, including the ones in emails already sent, stop working.
  • Turn Off Link stops every link to the invoice at once. Anyone who opens an old link sees that the invoice is no longer available. You can email it again later.
  • A link works for a year. Voiding the invoice stops its links straight away.
  • Email Invoice is offered while something is still owed. Once the invoice is paid in full, the button becomes Email Receipt (below).
  • If your organization takes card payments (see How to Accept Card Payments on Invoices), the invoice page shows Pay by Card while there is a balance, and a card payment is recorded on the invoice for you. Otherwise customers pay you the usual way, and you record it with Record Payment. If Include ACH info on quotes and invoices is on in your Receivables settings, the page and the email show your bank details under How to pay.

Get told when a customer pays online

When a customer pays an invoice by card from its invoice page, everyone who can view your organization's receivables gets an Invoice Paid Online notification. The same notification comes if a card payment arrives on an invoice that was already paid another way, so you know to refund the difference to the customer.

To turn it off, open Notifications, go to the Settings tab, and click its tile under What you are told about so it shows Muted. Click it again to hear about it again. See The Notification Center.

Email a receipt

When the invoice is Paid, the Send to Customer card offers Email Receipt instead of Email Invoice.

  1. Click Email Receipt.
  2. Check Send To, add a Personal Message if you like, and read What the Customer Will Get: a thank-you for the payment, the amount received and the day it was paid in full, with the paid invoice attached as a PDF.
  3. Click Send.

The receipt never asks for money. Its View receipt button opens the same invoice page, which shows Paid in full and thanks the customer. Each receipt is listed under Sent and Shared as Receipt emailed to, with who sent it and whether the customer opened it.

See a customer's invoices

Open the customer's account and go to Orders. Below the orders, Invoices lists every invoice for that account — work orders, orders and subscriptions — with its status, the balance due and when it is due, and what the account still owes in total. Click one to open it on its work order's or order's Invoice tab (or its subscription's Invoices tab). Back returns you to the account.

Change the customer or the details

  • In the summary at the top, click the swap mark beside Customer to file the work order under another account, or to take it off an account.
  • Click Edit Details to change the summary, description, trade, priority or service address.

What you'll see

The Work Orders list shows each job's number, customer, technician, next visit, status and total, with a count for each status along the bottom. Every work order has a number, including ones raised before numbers were added. Click a status count to show only those jobs. Work orders made before markets were recorded appear on every Service market's tab.

Your Workspace Is Waiting

Start free in minutes. Add products whenever you are ready — no migration, no new logins.

3 days of everything, then Free with one member. No card needed.

Live status