How Camera Settings Are Organized

Settings › Cameras holds everything about your organization's cameras. Every page has its own address, so you can bookmark it or send it to a colleague.

The Five Tabs

Tab

What it holds

Overview

What needs you (a site that went offline, settings a site hasn't applied yet, a connector that is behind), every page as a card, and the latest changes.

Sites

Your Sites — each site's Overview, Find Cameras, Cameras, Recorders, Configuration, Diagnostics and Floor Plan. Connector & Updates — the newest connector and which sites need it. Floor Plans — every site's plan.

Cameras

All Cameras as cards with a live snapshot, or as a list with the on/off and sound switches. Open a camera for its Details, Motion and Who Can Watch.

Groups

Your camera groups. A group switched off grants nobody anything.

Who Can Watch

Everyone — who may watch each camera, and cameras nobody was added to. Check Access — pick a person and see every camera they can watch now, the ones they can watch only at set times, and why.

Scheduled Access

On a camera's or a group's Who Can Watch, click the clock beside a person or a team to limit when they may watch — for example the night team every day 18:00–06:00. An end time before the start runs past midnight. Outside the window the camera simply isn't offered to them. Without a schedule a rule works all the time.

Motion Detection

Open a camera and choose Motion to have the camera tell Kamo when it sees movement. It is off for every camera until you turn it on.

  • Can this camera report motion? The top of the page says so. The site's connector asks the camera on its own; Check Again asks right now. Cameras that stream through ONVIF or RTSP usually can. Doorbells and cloud cameras (HomeKit, Ring, Tuya and similar) and plain picture links can't, and the page says This Camera Can't Report Motion. A site whose connector is older than motion detection shows Update The Connector.
  • Sensitivity — how long movement must last before it counts: Low about 3 seconds (busy places), Medium about 1 second, High at once.
  • Quiet Time Between Events — movement that starts again this soon after the last motion ended is the same event. One event sends one alert, never one per second of movement.
  • When Motion Counts — turn on Only At Certain Times to choose days and hours (for example weekdays 18:00–06:00, which runs past midnight). Motion outside the window still shows on the timeline but raises nothing and tells nobody.
  • Who Hears About Motion — Send Motion To Alarms opens Smart Devices › Alarms with a new camera motion alarm for this camera, so motion raises an alarm, follows its escalation and can start automations, like any sensor. When no alarm takes a motion event, Tell People Directly sends one notification to the people you name (they need to be able to see cameras). Their notification and the alarm's both have Watch Camera, which opens the live view.
  • Motion Port — for people who manage sites: many cameras answer motion questions on a port other than 80 (8000, 8080 or 8899 are common). Set it here if the page says the camera didn't answer.
  • Recent Motion — the last 30 days of movement, newest first, with what each event did: Raised 1 Alarm, Told 2 People, Outside Schedule, or Still Moving while it goes on.

Changes on the Motion page show in Recent Changes and can be put back with Undo. The people told are recorded as a count, not by name.

Snapshot Thumbnails

Camera cards show a still picture, taken when the card comes into view and again every minute while you're looking. A site whose connector is older than the newest release shows Update the connector to see snapshots instead — Sites › Connector & Updates has the download.

Floor Plans

Upload a picture of a site's layout under Sites › a site › Floor Plan and drag each camera onto it. A site can share one plan with Smart Devices: link the plan Smart Devices made for the same building, and cameras and devices sit on the same picture. Every change shows in Recent Changes.

Recent Changes and Undo

Changes to cameras, their motion settings, groups and who may watch are kept with who made them. The newest change to something can be put back with Undo. A camera's stream address or a recorder's login only records that it changed — never the address or the password.

Your Workspace Is Waiting

Start free in minutes. Add products whenever you are ready — no migration, no new logins.

3 days of everything, then Free with one member. No card needed.

Live status